|
Notice: The supply WiFi Adapter works only with Wireless Network (2.4GHz b/g/n) and do not work with Wireless Network 5GHz! From the XBMC home screen go to OpenElec Configuration under Programs Tab
Under Network Tab be sure that Wireless networks are active and Wired Networks are inactive
Under Connections Tab select your network and click OK it. If not see any network, please wait until you see them, sometimes it can takes about half a minutes.
When pop up menu appears hit Connect
When Virtual keyboard appear type in your WiFi network password and hit Done.
If your password is accepted you should see issued IP Address so that means you are connected to your WiFi network.
|
|
Things to check if wireless does not work: - You do not have an Ethernet cable plugged in! |
